Hot keywords: pH&ORP Monitoring control table DC pump internal protein skimmer Internal protein skimmer  

 

Company news

Current Position »  Company news

Precautions for using a heating rod in an aquarium

Release time:[2019-7-8]     Browse the number:3588

The heating rod should not be exposed to the water except for the power supply.

Problems that should be noted when using a heating rod

If two heating rods are installed in the aquarium, install them on both sides of the tank as much as possible to facilitate uniform heating. For some insensitive fish, it is best to add a sleeve to the heating rod to prevent the fish from being burnt.

1. Do not energize the heating rod in the air. Because it heats up extremely quickly in the air, it burns out the heating rod, and then crushes the glass or burns the hand. Even if it is powered off, it cannot be taken out of the water immediately. The temperature at this time is also very high, and it is also easy to burn people and burn out the heating rod.

2. Educate children not to touch the heating rod.

3, the life of the heating rod: We recommend that the bimetal heating rod should be replaced after one to two years, because the internal bimetal time has been used for a long time, it is easy to malfunction, the relative price is not very expensive, so as not to happen Some unnecessary losses. The replaced heating rod can be used for heating when changing water.

4, there is no need to buy imported heating rods, not only I support domestic products, but an ordinary bimetal imported heating rods are less than one hundred yuan, more than a few hundred yuan, according to the use of six years, 20 yuan per year It is better to buy several domestic brand heating rods and use new heating rods every year.

5, there should be spare heating rods in the home, so that the heating rods will not be broken in the middle of the night to boil water.

6. If the heating rod is broken, do not repair it. The ordinary bimetal heating rod is not worth repairing. It is not safe after maintenance. The split heating rods are also incapable of repairing. Finding a professional to repair the estimated price is no less than buying a new heating rod.

7. When changing the water, be careful not to expose the heating rod to the water level too low.

8. Always observe the heating rod and thermometer. The indicator light of the heating rod does not indicate normal operation. The water temperature should be taken as the standard. Because the indicator light is always on, and the heater is not working. Of course, sometimes the indicator light is broken and the heating rod is still working, but this is less. ,

9, the following tells the author how to use the heating rod in the aquarium, first use a thermistor to detect the temperature type temperature control switch outside the aquarium, and then connect two bimetal heating rods. The two bimetal heating rods in the aquarium are set at 28 degrees Celsius and adjusted to the state of synchronization as much as possible. The thermostat outside the aquarium has a liquid crystal display and a probe water-off alarm function, set to 30 degrees Celsius, thus having double insurance. .

Company:KAS AQUARIUM EQUIPMENTS MANUFACTURING FACTORY

Tel:+8620 81235505 (086) 18926130206

Fax:+8620 81234487

Contact: Mr.Lau , Mrs.Hebe

E-mail:aquaexcel@hotmail.com

Q Q:1044404921

Address:No.17,Wenchang Road, Longxi Avenue, Liwan District, Guangdong, China

Company © KAS AQUARIUM EQUIPMENTS MANUFACTURING FACTORY 粤公网安备:44010302000773号